32
Event Log
Accessing the Event Log enables the user to scroll
through the S5K Modular’s past 255 occurrences.
To open the Event Log, start at the Main Menu,
select Event Log and press
.
Press the and
buttons to scroll through the
S5K Modular’s
Event Log in chronological order.
The Event Log contains the following information.
The typical event log screen will display the event
number and reference code on the first line. The
purpose of this code is to assist factory trained
service personnel in troubleshooting. Please make
a note of the code number when contacting
technical support. The second line contains the
event description. The third line will have either
more detail about the event, a serial number
indicating as to which module the event occurred,
or be left blank. The last line will show the date and
time the event occurred.
Press
to go back to the Main Menu.
When an event or alarm occurs, the User Interface
LCD will display the last message regardless of
the default screen. See
Alarm Messages on
page 36
for a list of events and alarms and
possible solutions. If you are unsure of the
corrective action to take, contact a Sola/Hevi-Duty
representative at the number listed on the back of
this manual.
Alarm Log
Alarms affecting the S5K Modular UPS can be
viewed at the Alarm Log screen. To access the
screen, go to the Main Menu, select Event Log and
press .
When an alarm sounds, the User Interface LCD
will display a general explanation as to what the
alarm is indicating. To view these messages in
chronological order, press the and
buttons.
• The first line of a typical alarm log screen will
display the reason for the alarm occurrence.
• The second line will give a more specific detail
of the occurrence (i.e., module serial number).
Press
to go back to the Main Menu.
Transfer to Bypass
In the event of a UPS overload or failure, the UPS
will transfer to bypass via its automatic bypass
switch. The user can manually transfer the UPS to
bypass if needed. For information, see
Manual
Transfer to Bypass on page 23
.
Event Log
Event xxx/xxx
xx
event message
event message
DD/MMM/YYYY HH:MM:SS
Main Menu
UPS Status
UPS Configuration
Display Date/Time
> Event Log
Alarm Log
Transfer to Bypass
Module Replacement
Tools
Event 031/255 04
Power module removed
S/N:0012200001002G1
19 MAY 2000 16:54:27
Event Detail or
Serial Number
Date of Event
Time of Event
Description
Event Number
Reference Code
ESC
Main Menu
UPS Status
UPS Configuration
Display Date/Time
Event Log
> Alarm Log
Transfer to Bypass
Module Replacement
Tools
Alarm Log
Alarm Log Message
ESC
Summary of Contents for S5K
