SOLA 610 UPS Optional Features
4.3 Operating CheckUPS II® (cont.)
Logging
If you haven’t already selected
Configure|Action…
from the
main menu bar, please select it now . In the
Event Action
Configuration
window, click the
Logging
command button to
display the
Event Logging Configuration
window. If you select
the
Logging Enabled
check box, a check mark will appear on
the
Logging
command button.
If you want to avoid logging messages for events that last a
short duration, set a
Delay
. If you want the event log to show
one message per event occurrence, set the logging
Interval
to
0
. If you want to repeat logging for events that last longer, set
the logging
Interval
to the desired time.
Enter the text of the
Log Message
. In some cases, you may
wish to add a current data value to the message text. Click the
Add Data…
command button to display a list of UPS values
from which to choose. For example, if the UPS is on battery
power, you may want to log the current input voltage value. The
available UPS values depend on the UPS model.
When you are finished configuring
Logging
, click the
OK
command button. If you want to revert to the suggested values,
click
Defaults
. If you want to abandon changes, click
Cancel
.
Broadcasting
If you haven’t already selected
Configure|Action…
from the
main menu bar, please select it now . In the
Event Action
Configuration
window, click the
Broadcasting
command button
to display the
Broadcasting Configuration
window. If you select
the
Broadcasting Enabled
check box, a check mark will
appear on the
Broadcasting
command button.
For Windows NT® or OS/2, you can notify users on the
Local
Domain
, and/or notify users on an Alternate Domain. All
broadcast messages also appear in the alarm box at the bottom
of the main window. If you want to avoid broadcasting
messages for events that last a short duration, set a
Delay
. If
you want to notify users one time, set the broadcast
Interval
to
0
. If you want the users to be notified at regular intervals, set the
broadcast
Interval
to the desired time.
Enter the text of the
Broadcast Message
. In some cases, you
may wish to add a data value to the message text. Click the
Add Data…
command button to display a list of UPS values to
choose from. The available UPS values depend on the UPS
model.
When you are finished configuring
Broadcasting
, click the
OK
command button. If you want to revert to the suggested values,
click
Defaults
. If you want to abandon changes, click
Cancel
.
17