SOLA 610 UPS Optional Features
4.3 Operating CheckUPS II® (cont.)
Paging
If you haven’t already selected
Configure|Action…
from the main
menu bar, please select it now . In the
Event Action Configuration
window, click the
Paging
command button to display the
Paging
Configuration
window. If you select the
Paging Enabled
check box, a
check mark will appear on the
Paging
command button.
If you want to avoid paging the administrator for events that last a
short duration, set a
Delay
. If you want to page one time per event
occurrence, set the paging
Interval
to
0
. If you want to repeat paging
for events that last longer, set the paging
Interval
to the desired time.
Click
Configure Modem…
to display the
Modem Alert Configuration
window. The modem configuration can also be displayed by choosing
the
Configure|Modem…
menu option.
To configure the modem, select the
Modem COM port , Baud Rate ,
Parity, Data Bits,
and
Stop Bits
. The
Initialization String
is sent to
the modem before paging is attempted. The
Dial Prefix
is added to
the beginning of each of the
Pager Numbers
before they are sent to
the modem.
The
Initialization String
allows you to configure the modem to return
result codes. The result codes allow CheckUPS II® Advanced to
determine the status of the page. The default string is ATE0Q0V0X4.
The meanings of the codes follow:
AT
Attention code
E0
Turns echo off so commands are not echoed back to the
computer
Q0
Enables result code return to the computer
V0
Enables numeric result codes which allows CheckUPS II®
Advanced to determine the page status
X4
Enables all of the numeric result codes which allows
CheckUPS II® Advanced to determine dial tone, busy signal,
and answer status
See your modem user’s manual for more information on modem
commands.
The
Dial Prefix
should begin with
AT
, and include any Hayes
commands required to acquire a line and begin dialling the telephone
number of the paging service. The default prefix is
ATDT
.
The
Pager Numbers
should include the telephone number for the
paging service, and any required pauses and commands to complete
the page. Up to three
Pager Numbers
may be configured for all
events.
To configure a pager number, click the
Add
command button. To
modify an existing pager number, click on the number and click
Modify.
To delete a pager number from the list, click on the number
and click
Delete
.
18