15
EN
7.1.3 Creating inclinations beyond the range of automatic levelling
On:
Turn the on/off switch, transport lock to the left (OFF position).
Press and hold the tilt key for 5 seconds to start the tilt function.
Press the V key to switch on the vertical lines.
Press the H key to switch off the horizontal lines.
To indicate that the self-levelling is switched off, the lines will blink every 4 seconds.
Off:
Briefly press the tilt key to exit the tilt function.
CAUTION
If the laser line is not projected vertically to the surface or the surface is uneven, this can lead
to erroneous measurement results.
Make sure that the laser line is projected vertically to the wall or to the target surface.