20
EN
9. Maintenance, storage and transportation
9.1 Cleaning
Wipe off any dirt with a soft damp cloth.
Check the outlet openings of the laser regularly, and thoroughly clean them if necessary. Do not touch
the glass with your fingers.
Do not use aggressive cleaning agents or solvents.
Do not immerse the device into water!
Clean and dry wet equipment, accessories and transport containers prior to packaging them. Only
pack equipment again when it is completely dry.
Keep plug connections clean and protected from moisture.
9.2 Storage
The equipment may only be stored within the specified temperature limits
(see Chapter 3 / Technical data)
.
After a prolonged storage, check the accuracy of the measuring device before using it.
9.3 Transport
9.3.1 General
The device may be damaged by strong vibrations or by dropping.
Never transport the product loose. Always use the original packaging or an equivalent
transport container.
Switch off the measuring device before transporting it. During the shutdown the pendulum unit is
locked in position and protected against damage.
Check the unit for damage before use.
Regularly check the accuracy of the device
(see Chapter 8 / Checking the accuracy)
.
9.3.2 Batteries / rechargeable batteries
When transporting or shipping batteries, the operator is responsible for complying with the applicable
national and international laws and regulations.
Before shipping, remove the batteries from the device.
