- 23 -
To
RAISE
the support leg:
IMPORTANT:
WITH THE MACHINE COUPLED
TO THE TRACTOR.
1-
Loosen the hand pump key (Fig. 5.43) to raise the tele-
scopic leg. Once the leg is up, tighten the key again.
2-
Release the latches (Fig. 5.44) and raise the support leg
until the latches are engaged again.
Fig. 5.43
Fig. 5.43
Fig. 5.44
Fig. 5.44
5.6.2 REAR SUPPORT LEGS
The rear support legs are located on the coulter unit. To
RAISE
or
LOWER
the support leg:
1-
Remove the pin and the bolt (Fig. 5.45) to release the leg.
2-
Move the support leg to the desired position (Fig. 5.46).
3-
Fit the bolt and the pin (Fig. 5.47).
Fig. 5.45
Fig. 5.45
Fig. 5.46
Fig. 5.46
Fig. 5.47
Fig. 5.47
IMPORTANT:
RAISE ALL REAR SUPPORT LEGS
WITH THE COULTER UNIT RAISED OFF THE
GROUND.
IN WORKING CONDITIONS, ALL SUP-
PORTING LEGS MUST BE RAISED.
Summary of Contents for VESTA-2813 NS PLUS
