- 53 -
To set the track marker disc's distance and inclination, pro-
ceed as follows:
1-
Adjust the length of the first section of the track marker by
loosening the 2 nuts and bolts (1, Fig. 6.92), then retighten
the bolt and the locknut.
2-
Adjust the length of the second section of the track mark-
er and the track marker disc's inclination by loosening the
2 nuts and bolts (2, Fig. 6.93), then retighten the bolt and
the locknut.
Fig. 6.92
Fig. 6.92
1
ADJUST THE WORKING LENGTH TO THE DIS-
TANCE B CALCULATED PREVIOUSLY. (
B
= DIS-
TANCE BETWEEN THE TRACK MARKER DISC
AND THE LAST COULTER CLOSEST TO THE
TRACK MARKER)
YOU ARE ADVISED NOT TO INCLINE THE DISCS
TOO MUCH AS THIS COULD CAUSE FAILURES.
Fig. 6.93
Fig. 6.93
2
Summary of Contents for VESTA-2813 NS PLUS
