12
CLEANING
VERTICAL IRONING
It allows for wrinkles to be removed from delicate garments without any need to place them
on the ironing board: jackets, coats, curtains, suede garments, etc.
1 Put the garment on a hanger, away from other garments and people...
2 Select the required ironing temperature with the temperature selector (3), place the
CVG in an upright position and press one of the two steam buttons (4).
)
Keep either of the two steam buttons (4) pressed to get steam during upright
ironing.
,
At point (••) you will get damp, white steam that is easier to see, whereas at point (•••)
and (MAX) the steam is dryer and although its flow is still the same, it is harder to see.
FILLING WITH WATER
If during ironing the tank runs dry, the operation/temperature LEDs (5) of all the levels will
start to blink every second.
1 Disconnect the CVG, keep it in an upright position and refill the tank using the cup (6)
that comes with it (fig. 1).
,
Only the LED of the selected operation/temperature (5) will light up.
)
If it completely runs dry of water, a strange noise will be heard from the micro-pump.
Do not press the steam buttons (4) if this noise is heard, as this may cause damage to
the system. Disconnect the device and refill the water tank. When you reconnect it, the
noise will disappear.
CLEANING
SOLE-PLATE
1 Unplug the iron and let it cool down.
,
Use environment-friendly clay-based products to clean the sole-plate.
OUTSIDE
1 To clean the outside of your CVG, use a cloth moistened in soapy water.
,
Do not clean with abrasive chemical products or solvents as it may attack certain plastic
parts and / or remove some of the marks and / or indications.
2 Store your CVG in the vertical position, wind the cord round the heel and secure it with
the clip.
,
Although the power cord is fitted with a 360º rotational elbow, NEVER FORCE
this cord when winding it around the appliance on the first turn.
WARRANTY CONDITIONS
•
Solac accepts no liability for faults in your appliance in the event of noncompliance with
the specifications of the warranty conditions or failure to follow the operating or
maintenance directions included in the instruction brochure for every appliance.
•
The warranty conditions may be found in the accompanying “World-Wide Guarantee”
booklet.
•
We remind you that the damage caused by the effects of scale is not covered by
the guarantee.
BOOKCVG9500.book Page 12 Friday, June 5, 2009 10:50 AM