SOLAC Great Lakes, Instructions For Use Manual

EN

USE:

 -Extend the cable completely before plugging 

it in.

 -Connect the appliance to the mains.
 -The pilot light comes on in red color.
 -Leave to heat up for a few Minutes.
 -Wait until the pilot light change to green will 

indicate that the appliance has reached an 

adequate temperature.

 -During the appliance’s use the pilot light will 

come on and off automatically, indicating the 

heating elements are working, and therefore 

maintaining the desired temperature.

 -Push the Steam button to start working
 -Orient the appliance to direct the steam flow 

in the desired direction

STEAM GARMENT:

 -The steam garment is easy to use and is 

perfect for removing wrinkles/creases from 

garments and curtains as well as refreshing 

furnishings fabrics.

 -It can be used on most fabric as long as 

the fabric is hanging or where the garment 

steamer can be easily used in an upright 

position moving over the fabric in an up and 

down motion.

 -NOTE: the garment steamer is designed to 

be used in an upright position on hanging 

garments, refrain from using the steamer in 

or on garments in a horizontal position.

 -Hang the garment from a hanger and stretch 

the fabric slightly with one hand.

 -Check that there is ventilation behind the 

fabric.

 -Check garment pockets are empty.
 -NOTE: we recommend you do not steam 

over metal accessories, use caution and 

steam around the metal accessories.

ONCE YOU HAVE FINISHED USING THE 

APPLIANCE:

 -Unplug the appliance from the mains.
 -Remove the water from the water tank.
 -Let the product cool down 
 -Clean the appliance.

ASSEMBLE THE ACCESSORIES (FIG 2)

 -Attention: Always let the steamer cool 

down before assembling or removing the 

attachments.

 -Assembly of fabric brush:
 -1 Align the bottom protruding part of the 

fabric brush into the bottom groove of the 

steam head.

 -2 Push the head of the fabric brush until 

the top protruding part also clicks in the top 

groove of the steam head.

HANDLE FOLDING (FIG 3)

 -This machine is with well-designed handle 

folding function, the handle can be folded, 

stretchable, convenient collection and travel.

 -Fold: Slide the button down to the bottom, 

then fold forward, press the handle to the 

bottom and fold:

 -Stretch: Stretch the handle backward, lock 

button “click”, stretch is done.

SAFETY THERMAL PROTECTOR:

 -The appliance has a safety device, which 

protects the appliance from overheating.

 -If the appliance turns itself off and does not 

switch itself on again, disconnect it from the 

mains supply, and wait for approximately 

15 minutes before reconnecting. If the 

machine does not start again seek authorised 

technical assistance.

DECALCIFICATION

 -If the appliance begins to begins to produce 

steam more slowly than, or stops producing 

steam and then starts again, you may need to 

decalcify your steamer. Decalcification refers 

to removing the calcium deposits that form 

over time on the metal parts of the steamer. 

For best performance from the Garment 

Steamer, please decalcify the unit from time 

to time. The frequency depends upon the 

hardness of the water being used and how 

often you use the steamer.

 -Method:
 -1.To decalcify, use a solution of 1/3 white 

vinegar 2/3 water in the water tank.

 -2.Plug the unit into electrical outlet. Wait 

until the red light goes off then push the 

steam button, and run until all amount has 

steamed. Release the steam button, unplug 

from electrical outlet, and allow to cool for 30 

minutes.

 -Repeat the above procedure as many 

times as necessary until a normal steam 

rate returns, usually 2 to 3 times. With each 

repeated cycle, use a fresh solution of