background image

10

version 1.1

(732) 730-9880

Multiple SolarArcs

can be installed in series for larger pools and/or for more rapid heating. To connect multiple units

together, use the provided rubber hose and hose clamps to join the SolarArcs together at the lower end. 

From the first SolarArc’s output (labeled “To Pool”) use the rubber hose connector and 2 hose clamps and connect to
second SolarArc’s header near the label “From Filter”.

If connecting 3 SolarArcs together use the same process as above to connect SolarArcs 2 to 3. 

Connect the last SolarArc’s adaptor located by the “To Pool” label back to the swimming pool. 

Installing SolarArc for a soft-sided pool:

For smaller soft sided pools using 1¼” flex hose use the provided elbow adaptors.  For larger sized soft-sided pools
that use a threaded union to connect the pump and filter system, use adaptors (provided) to connect the threaded
adaptors to the SolarArc.

• Connect hose from filter to header end labeled “From Filter”.

• Connect return hose (not provided) to header end labeled “To Pool”.

• Connect other end of return hose to pool return.

Summary of Contents for Smartpool S204

























Reviews: