Professional, Vision
4
1408TU0710
Safety information
J
General safety information
The operation and maintenance of a PV system
require a substantial level of technical knowledge.
Therefore, any work on the system may only be
carried out by qualified and authorized personnel.
Make sure to read these mounting instructions
carefully before installing, commissioning
or servicing the PV system and keep these
instructions in a well accessible location. Failure to
comply with these safety instructions may result in
personal injury and product damage. Please keep
children away!
We strive to be the leader in innovation and
research, while continuing to improve our
products.
For this reason we reserve the right to make
changes to this installation guide without prior
notice.
J
Important safety instructions
The use of these modules must comply with
original design purposes. The modules should not
be altered technically. When mounting, make sure
that the valid local building regulations, standards
and accident prevention regulations are adhered
to. Make sure that all required safety instructions
for the mounting and operation of any further
system components are also adhered to.
J
Warning: Extreme Danger
due to electrical shock!
Solar modules generate electricity. When exposed
to light, a voltage occurs, which can be dangerous
and life-threatening. Even though the individual
modules generate a relatively low voltage of
50 V DC, the voltage will accumulate as soon as
several modules are connected in series. Modules
connected in parallel result in accumlation
of the currents. Although the fully insulated
plug contacts are designed to protect against
accidental contact, the following instructions must
be followed when handling the solar modules in
order to avoid combustion, spark formation and,
above all, fatal electrical shocks:
X
Never insert electrically conducting pieces into
the plugs and sockets!
X
Do not wear metallic jewelry during
mechanical and electrical installation!
X
Keep the tools and work area dry! Only install
solar modules and wires with dry plugs and
sockets!
X
Maintain utmost caution and care! When
working on the wires, always use both tools
and gloves which are insulated!
X
Do not disassemble the modules! Never
remove parts or name plates fitted by the
manufacturer! Only use flawless modules! Do
not treat the back side of the modules with
sharp objects, paints or adhesives!
X
Do not expose modules to artificially
concentrated sunlight
It is absolutely necessary that the wiring of the
modules is only carried out by qualified and
authorized personnel!
