Professional, Vision
9
1408TU0710
J
Install the module in an area
free of shade:
Even a low degree of shading will have a negative
effect on the system yield. Therefore, the system
must be installed in a location without shading.
The module should never be shaded completely
during the whole year and be exposed to direct
sunlight for several hours per day even in less
favorable periods of the year.
J
Ensure an appropriate ventilation
on back:
By an appropriate ventilation on the back, an
accumulation of heat with adverse effects on the
performance can be avoided.
J
Secure attachment
To ensure that modules are installed correctly,
make sure to securely attach the modules at least
four points. Framed PV modules can be clamped
on both the short and long sides. Frameless Vision
modules must be clamped on the long sides and
cannot be installed with arbitrary clamp types.
Only special laminate clamps from Solar-Fabrik
AG may be used to mount the modules. Use of
unauthorised laminate clamps will render the
product and performance warranty void.
NOTE for Vision series:
The detailed installation instructions in the
separate installation manual must be observed, in
addition to the notes appearing here.
