|
27
April 2021
|
Solar Stik
®
, Inc.
PRELIMINARY DRAFT
24VDC HyPR 3000 Operator and Maintenance Manual
Power Scavenging Port
Connect unregulated DC power ranging from 9 to 36 VDC to this 4-pin bayonet connector. Power
between these voltages is converted to 28.3 VDC and applied to the DC bus to charge batteries
or support small loads. Power input is limited to 150 W. Power output is limited to 100 W. Custom
cables may be required. Pins A and C are the current conductors, pins B & D are unused.
9-36VDC
Input Limit:
150 W max
(A)
Neg-
(C)
Pos+
Figure 12. HyPR 3000 DC power scavenging port