December 2020
|
Solar Stik
®
, Inc.
86
|
System Setup and Operation Manual for the Solar Stik G-BOSS E Light HPS
PRELIMINARY
2
Remove and inspect the filter. Replace the filter if it is damaged (arrows in Figure 51). If the filter
is in good shape, clean it by rinsing it with water to remove the particulate matter and dry it.
Replace the filter if it is crushed, rotted, or cracked as illustrated in the left column of Figure 51.
Spare filters may be stored behind the PRO-Verter I-Plate.
3
Reinstall the clean, dry filter or install the new filter. Secure the vent shroud with the four (4)
fasteners.
Figure 51. Replacing PRO-Verter filter (left); cleaning a PRO-Verter filter (right)
Replace
Clean and Reuse
