December 2020
|
Solar Stik
®
, Inc.
48
|
SYSTEM SETUP AND OPERATION GUIDE FOR THE SOLAR STIK USAF G-BOSS MEDIUM AND HEAVY HYBRID POWER SYSTEM
PRELIMINARY DRAFT
Seconds will
“count down”.
TECH
01 Temperatures
Press Select
02 Revisions
Press Select
05 SETUP PIN
SETUP Unlocked
08 Load Defaults
Press Select
04 Fault History
Press Select
06 Ext Control
Press Select
03 Inv Model
MS4124PE
Inv BTS ###F
Inv Tfmer ###F
Inv FETs ###F
AGS Sensor ###F
ACLD Temp ###F
PT BTS ###F
PT FETs ###F
PT Inductor ###F
02 Revisions
Inverter: 1.1
Set SETUP
Pin = 2019
Set SETUP
Unlock SETUP
Set SETUP
Lock SETUP
Set SETUP
Change PIN
04A Inv Faults
Press Select
06 Ext Control
No Ext Control
[Fault]*
H1 D- 0 HH:MM
06 Ext Control
###
01 Temperatures
Inv BTS ###F
Read-only Displays
Remote: 4.0
AGS: #.#
BMK: #.#
Router: #.#
ACLD: #.#
PT: #.#
Read-only Displays
Read-only Displays
[Status]
VDC ADC
BTS:
###F
Tfmer:
###F
FETs:
###F
* Specific fault listed; if no fault, “No Fault
History” displays. H1= the most recent fault;
H2-H9 are the faults in the earliest/past
record H9 being the oldest.
04B AGS Faults
Press Select
04C PT Faults
Press Select
04D Clear Faults
Press Select
04D Clear Faults
in #.# seconds
04D Clear Faults
HISTORY CLEARED
Press and hold
Select for 5 seconds
If “Yes”, only a 3-digit number displays.
07 Show ALL
Menus = NO
07 Set Show all
Menus = Yes or No
or
press and hold
Select for 5
seconds
08 Load Defaults
in #.# seconds
08 Load Defaults
DEFAULTS LOADED
TECH Button Menus
Feature not utilized by PRO-Verter 5000
Default = NO.
If no faults have occurred, “No Fault History” will appear. Further fault
information can be found in section 04, the METER button menus.
