Heating control - user manual
www.solarcontrols.cz
Instructions for the installation and setup
of the device
Page 4 of 58
GENERAL INFORMATION
Heating Control is a programmable controller of heating involving multiple sources and multiple points of
consumption. After the correct installation and setup, the controller will manage the heating of your house or
possibly your pool and it can also provide other control functions. A storage tank is always necessary for the
correct functioning of certain control blocks. The setup and monitoring of the controller functions always
requires an Ethernet connection.
Basic characteristics of the Heating Control device:
Fully programmable with the option of the individual setting of inputs, outputs and control blocks.
8 digital temperature inputs, 3 analog temperature inputs for NTC type sensors, 3 digital inputs, 2
relay outputs with the maximum load of 230VAC/10A, 2 contactless triac outputs with the maximum
load of 230VAC/1A, 2 external outputs with the option of generating fast PWM for the control of
suitable types of heat pumps or circulation pumps with continuous control.
1 control block of the outdoor unit of the heat pump with direct power control and condensation in
the storage tank.
1 control block of the solid fuel boiler or the hot-water fireplace insert.
2 control blocks of the heating circuit with the optional connection of an external room thermostat or
an internal temperature sensor.
1 control block of the pool heating when a pool heat exchanger is used.
1 control block of the storage tank cooling.
2 blocks of status duplicate.
2 blocks of differential controllers for regulation of the solar circuit, etc.
Integration with the WATTrouter M system, which, together with a suitable type of heat pump,
enables an efficient combination of heating on the basis of excess energy from the photovoltaic
source with heating according to the requirements of the internal control.
An integrated web interface allowing comfortable configuration and monitoring of the controller
activity by means of a standard Internet browser.
A real-time module with a lithium battery backup for the time control of the individual blocks.
Daily, weekly, monthly and yearly statistics of the selected quantities of the individual blocks, a
configurable chart for monitoring the selected quantities.
Firmware updating (for registered customers).
