UPS for 480 Vac Grid, User Guide, doc. rel. 4.0
146
This function reverses a power MODULES OFF command.
To turn modules on:
1.
From the System Menu select Operation > Turn on/off > Modules On.
The following screen appears:
Figure 131: Turn On/Off, Modules On
2.
Select the desired power modules you want to turn on.
The selected power modules are highlighted (in blue).
3.
Click Confirm.
The power modules go through a series of activation processes. This can take up to two
minutes.
The power modules are turned ON.
If you want to confirm that the Power Modules are active, navigate to the Status screen and
select the modules (Status > Modules). Locate the PFC and Inverter status confirm they both
say ON.
8.3.3.
Operation > Turn On/Off > CONTROLLER RESTART/SHUTDOWN
