50
UPS for 400 Vac Grid, Installation Guide, doc. rel. 3.0
supports DHCP, and if there is a preference for using either a fixed IP address or a dynamically
assigned IP address for the UPS.
To obtain an IP address automatically:
To obtain an IP address automatically, your network must support DHCP.
1.
From the System Menu select
Setup > Connectivity > Network Configuration
.
The IP address configuration screen appears:
Figure 33: IP Address Configuration
2.
Select
Obtain an IP address automatically
checkbox.
The IP Address, Subnet Mask, and Default Gateway text input fields are automatically
populated.
3.
Click
Confirm
.
The UPS software has obtained an IP address.
To assign an IP address manually:
4.
From the System Menu select
Setup > Connectivity > IP Address Configuration.
5.
Select
Use static IP address
.
