Chapter 5: User Interface
SolarEdge Installation Guide - MAN-01-00060-2.6
34
Options UPS configuration menu
Learn how to use the menus on the LCD screen to configure the inverter. Setup is available only when the ON / OFF
switch is in the OFF position. To do this, use the user buttons the internal LCD or LCD light button to move between
and select menu options.
Country network
The configuration of the country and the network is available using the internal user buttons only.
1
Select
Country
to indicate the country in which the inverter is installed and the network
1
Select
Country
to indicate the country in which the inverter is installed and the network
1
Select
Country
to indicate the country in which the inverter is installed and the network
1
Select
Country
to indicate the country in which the inverter is installed and the network
which it is connected. This parameter can get preconfigured. If that is the case, make sure it is set to the correct
country.
WARNING !
The inverter must be set to the correct country, to ensure that it complies with regulations country network and functioning properly with it
The list of countries is displayed. If no country is configured, the value is <
None>.
The list of countries is displayed. If no country is configured, the value is <
None>.
NOTE :
If the inverter is not configured to any country, it will not produce energy, and the following message on the LCD screen:
No country selected
If the inverter is not configured to any country, it will not produce energy, and the following message on the LCD screen:
No country selected
A plus sign (+) next to the country indicates that another menu is available for the selection of network options.
2
Confirm your selection of countries on the confirmation screen: Switch on
YES
and press
2
Confirm your selection of countries on the confirmation screen: Switch on
YES
and press
2
Confirm your selection of countries on the confirmation screen: Switch on
YES
and press
2
Confirm your selection of countries on the confirmation screen: Switch on
YES
and press
sure
Validate.
sure
Validate.
Language
1
Select the Language option to set the language in which the LCD screen should display.
1
Select the Language option to set the language in which the LCD screen should display.
2
Confirm the language selection on the confirmation screen: Switch on
YES
and press
2
Confirm the language selection on the confirmation screen: Switch on
YES
and press
2
Confirm the language selection on the confirmation screen: Switch on
YES
and press
2
Confirm the language selection on the confirmation screen: Switch on
YES
and press
sure
Validate.
sure
Validate.
Communication
1
Select
Communication
to define and configure the communication option used
1
Select
Communication
to define and configure the communication option used
1
Select
Communication
to define and configure the communication option used
1
Select
Communication
to define and configure the communication option used
by the inverter to communicate with the SolarEdge Monitoring Portal and the communication option used
for communication between multiple inverters.
2
Select
Server
to define which mode of communication is used for communication
2
Select
Server
to define which mode of communication is used for communication
2
Select
Server
to define which mode of communication is used for communication
2
Select
Server
to define which mode of communication is used for communication
between the inverter and the SolarEdge Monitoring Portal. Refer to
Chapter 6: Communication Setup
between the inverter and the SolarEdge Monitoring Portal. Refer to
Chapter 6: Communication Setup
between the inverter and the SolarEdge Monitoring Portal. Refer to
Chapter 6: Communication Setup
a complete description of these communication options.
NOTE :
This menu only shows the communication options installed in the inverter.
3
The following example shows a hierarchical tree of the menu options on the menu
3
The following example shows a hierarchical tree of the menu options on the menu
Communication.
For more detailed information about all the configuration options, refer to the
Application of
Communication.
For more detailed information about all the configuration options, refer to the
Application of
Communication.
For more detailed information about all the configuration options, refer to the
Application of
communication options Note
available on the SolarEdge website at
http://www.solaredge.com/files/pdfs/solaredgecommunication_options_application_note_v2_250_and_above.pdf
communication options Note
available on the SolarEdge website at
http://www.solaredge.com/files/pdfs/solaredgecommunication_options_application_note_v2_250_and_above.pdf
communication options Note
available on the SolarEdge website at
http://www.solaredge.com/files/pdfs/solaredgecommunication_options_application_note_v2_250_and_above.pdf
.
