10 |
P a g e
Safety and Installation instructions
© The Solaria Corporation. Contents subject to change without notice.
Document SPS-1006 Rev 02, April 25, 2017
4.3 Module Direction and Tilt Angle
Modules produce maximum energy when they are pointed directly to the
Sun. Modules get maximum sunlight throughout the year if they face
South in Northern Hemisphere and they face North in Southern
Hemisphere.
When mounted on a single axis tracker, modules may be tilted or kept
horizontal. Tilting will produce more annual energy.
4.4 Module Orientation
Horizontal Single Axis Tracker
:
Modules can be mounted in either
“portrait” or “landscape” orientation on a tracker. For best performance,
the axis should be aligned with the North-South direction. If the axis is
not aligned with the North-South direction, it is critical that the controller
of the tracker corrects for this misalignment.
5.0
Maintenance
Solaria modules are virtually maintenance free. Following simple maintenance
steps will ensure reliable production of DC electric power for the expected life
of the product.
Inspect electrical and mechanical connections for safety and corrosion at
least once every year.
Under most weather conditions, normal rainfall is sufficient to keep the
module glass surface clean.
Modules that are mounted at a small tilt angle will not self-clean as
easily as modules that are mounted at large tilt angles. If dirt build-
up becomes excessive, clean glass surface with water and soft
cloth. Do not use harsh cleaning materials.
Cleaning the back surface of the module is not necessary for proper
operation. Should it be deemed necessary to clean the back surface,
avoid penetrating the back sheet.
