3 |
P a g e
Safety and Installation instructions
© The Solaria Corporation. Contents subject to change without notice.
Document SPS-1006 Rev 02, April 25, 2017
There are no user serviceable parts within the module. Do not attempt to
repair any part of the module.
Installation should be performed by authorized personnel only.
Use insulated tools to reduce risk of electric shock. Do not touch
terminals with bare hands.
Do not stand on, drop, or allow objects to fall on modules.
Do not install or handle modules when they are wet or during periods of
high wind.
Before installing your system, contact local authorities to determine
necessary permit, installation and inspection requirements.
Module support structures should be wind rated per local code and
approved for use by the local authorities.
2.1 FIRE RATING AND SAFETY
Solaria PowerXT
TM
residential solar modules are UL1703 fire type 1 rated
and certified by an independent third party testing laboratory.
Refer to your local authority for guidelines and requirements for building
or structural fire safety.
The roof construction and installation may affect the fire safety of a
building: improper installation may contribute to hazards in the event of
fire.
It may be necessary to use components such as earth fault circuit
breakers, fuses and circuit breakers.
Do not use modules near equipment or locations where flammable gases
can be generated or can collect.
Artificially concentrated sunlight shall not be directed onto the
module.
