5
Installation
Steps
:
1. The solar panels should be installed in assigned places; Attention: when installing, the solar
panel should face toward the sun, and the best angle of inclination is 15° (according to the
local latitude) to assure the solar panel will work normally. Do not install the panel in shade
or even partly shaded areas
2. Please connect the polarity of solar panel correctly( the red wire stands for positive pole,
and blue or black wire, negative pole)
3. Please plug in the solar charging socket of the case with the output plug of solar panel;
make sure all the wires are connected correctly. Turn on the earth leakage circuit-breaker (the
main switch), and then you can operate the system normally.
Solar panel is connected as the picture shows
Attention:
Please connect the wires correctly as the picture shows. Solar panels are
installed outdoors; all other equipment should be installed indoors.
Warning: electric shock hazard! Photovoltaic array may produce high
voltage; please cover the solar panel before connecting