background image

SolarMate Secure Professional Plus  

INSTRUCTION MANUAL 

Model SMS003

GENERAL
Thank you for purchasing the SolarMate Secure professional Plus 

motion activated security floodlight. It was made to provide many  

years of service using environmentally friendly solar power.

BOX CONTENTS
1 x SolarMate Secure Professional Plus 48 LED Light and Motion Detector
1 x Solar Panel
1 x Wall Fixings Pack
1 x User Manual

FEATURES

•     Uses only solar power.
•  Can be installed anywhere as long as the solar panel can see the sky.
•  Uses 48 individual white high luminance LEDs.
•  Both the solar panel and light head are adjustable. The solar panel 

can be adjusted horizontally through 360 degrees and tilted 

backwards through 90 degrees. The light head can be adjusted 

horizontally through 180 degrees and tilted forwards or backwards 

through 120 degrees. 

•  Low voltage indication: the red indicator light will flicker when 

accumulator voltage is below approx. 7V, which indicates the battery 

voltage is deficient. When the accumulator voltage is below 6.1V,  

the unit turned off automatically.

•  Lithium battery controller possesses short-circuit / over-discharge / 

overcharge protection function.

•  There are three modes: ON, OFF & AUTO.

SPECIFICATION  
1.  10V/2.5W single crystal silicon solar panel. 
2.   7.4V 1800mAh (lithium battery)
3.   Max continuous illumination time: 4hrs
4.   Installation height: 1 to 3m
5.  Light adjustment time: 10sec to 3min
6.  Detection distance: 12m max (<24 Deg C)
7.   Coverage: 180

o

 detection angle

8.   Light sensitivity: 10 to 2000 LUX
9.   Working Temperature: –10 to +40

o

C

• Detection range: 12m 

      Solar Power Sensor Lamp Instruction 

What’s Inside the Package

• 48 LED matrix light w/motion detector

• Solar charger board

• User Manual

Introduction

Specifications

• Coverage: 180º detection angle

(22 ºC) (adjustable) 

• LED single power: 0.06W

• Matrix light: 48 super bright LEDs

• Rated load: 3.5W Max.

• Light-control: <10LUX

• Battery: 7.4V, 1800mAH lithium battery

• Solar charger board: 10VDC/2.5W Monocrystalline

                                     (with 15' cable) ( Life: over 3 years )

• Continuous illumination time: (1800mAH) Up to 4 hours

• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustable)  

• LED lamp installation height: 1m to 3m.

• Working temperature:  -10 ºC to +40 ºC

100V-240V Convert 9V

12V Convert 9V

Outdoor camping lighting

Charger

Car-mounted Charger

Note:Please purchase according to demand.

Note:Packaging items

Auto repair lighting

8X

1X

1X

8X

Φ6 Plastic expansion

4x30 Screw

LED 

SENSOR LIGHT

Solar panels

10V/2.5W

Cord:  5M

208mm

100mm

94mm

360mm

126mm

50mm

177mm

188.5mm

152.mm

• Luminous flux: 125lm

Thank you for purchasing

  SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURITY 

FLOOD LIGHT

With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made to 

provide many years of service using environmentally friendly solar power.

• Detection range: 12m 

      Solar Power Sensor Lamp Instruction 

What’s Inside the Package

• 48 LED matrix light w/motion detector

• Solar charger board

• User Manual

Introduction

Specifications

• Coverage: 180º detection angle

(22 ºC) (adjustable) 

• LED single power: 0.06W

• Matrix light: 48 super bright LEDs

• Rated load: 3.5W Max.

• Light-control: <10LUX

• Battery: 7.4V, 1800mAH lithium battery

• Solar charger board: 10VDC/2.5W Monocrystalline

                                     (with 15' cable) ( Life: over 3 years )

• Continuous illumination time: (1800mAH) Up to 4 hours

• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustable)  

• LED lamp installation height: 1m to 3m.

• Working temperature:  -10 ºC to +40 ºC

100V-240V Convert 9V

12V Convert 9V

Outdoor camping lighting

Charger

Car-mounted Charger

Note:Please purchase according to demand.

Note:Packaging items

Auto repair lighting

8X

1X

1X

8X

Φ6 Plastic expansion

4x30 Screw

LED 

SENSOR LIGHT

Solar panels

10V/2.5W

Cord:  5M

208mm

100mm

94mm

360mm

126mm

50mm

177mm

188.5mm

152.mm

• Luminous flux: 125lm

Thank you for purchasing

  SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURITY 

FLOOD LIGHT

With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made to 

provide many years of service using environmentally friendly solar power.

• Detection range: 12m 

      Solar Power Sensor Lamp Instruction 

What’s Inside the Package

• 48 LED matrix light w/motion detector

• Solar charger board

• User Manual

Introduction

Specifications

• Coverage: 180º detection angle

(22 ºC) (adjustable) 

• LED single power: 0.06W

• Matrix light: 48 super bright LEDs

• Rated load: 3.5W Max.

• Light-control: <10LUX

• Battery: 7.4V, 1800mAH lithium battery

• Solar charger board: 10VDC/2.5W Monocrystalline

                                     (with 15' cable) ( Life: over 3 years )

• Continuous illumination time: (1800mAH) Up to 4 hours

• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustable)  

• LED lamp installation height: 1m to 3m.

• Working temperature:  -10 ºC to +40 ºC

100V-240V Convert 9V

12V Convert 9V

Outdoor camping lighting

Charger

Car-mounted Charger

Note:Please purchase according to demand.

Note:Packaging items

Auto repair lighting

8X

1X

1X

8X

Φ6 Plastic expansion

4x30 Screw

LED 

SENSOR LIGHT

Solar panels

10V/2.5W

Cord:  5M

208mm

100mm

94mm

360mm

126mm

50mm

177mm

188.5mm

152.mm

• Luminous flux: 125lm

Thank you for purchasing

  SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURITY 

FLOOD LIGHT

With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made to 

provide many years of service using environmentally friendly solar power.

• Detection range: 12m 

      Solar Power Sensor Lamp Instruction 

What’s Inside the Package

• 48 LED matrix light w/motion detector

• Solar charger board

• User Manual

Introduction

Specifications

• Coverage: 180º detection angle

(22 ºC) (adjustable) 

• LED single power: 0.06W

• Matrix light: 48 super bright LEDs

• Rated load: 3.5W Max.

• Light-control: <10LUX

• Battery: 7.4V, 1800mAH lithium battery

• Solar charger board: 10VDC/2.5W Monocrystalline

                                     (with 15' cable) ( Life: over 3 years )

• Continuous illumination time: (1800mAH) Up to 4 hours

• Time setting: Min. 10 seconds, Max. 3 minutes. (adjustable)  

• LED lamp installation height: 1m to 3m.

• Working temperature:  -10 ºC to +40 ºC

100V-240V Convert 9V

12V Convert 9V

Outdoor camping lighting

Charger

Car-mounted Charger

Note:Please purchase according to demand.

Note:Packaging items

Auto repair lighting

8X

1X

1X

8X

Φ6 Plastic expansion

4x30 Screw

LED 

SENSOR LIGHT

Solar panels

10V/2.5W

Cord:  5M

208mm

100mm

94mm

360mm

126mm

50mm

177mm

188.5mm

152.mm

• Luminous flux: 125lm

Thank you for purchasing

  SOLAR POWERED WITH MOTION ACTIVATED 48 LED SECURITY 

FLOOD LIGHT

With its effortless setup and lightweight design, the light conforms to all your lighting needs. It was made to 

provide many years of service using environmentally friendly solar power.

44.50

26.50

6.  Place solar board at a sunny location.

5.  Mount solar board with screws. Adjust the direction.

44.50

26.50

6.  Place solar board at a sunny location.

5.  Mount solar board with screws. Adjust the direction.

44.50

26.50

6.  Place solar board at a sunny location.

5.  Mount solar board with screws. Adjust the direction.

INSTALLATION GUIDELINES

1.   GENERAL

(a)   You should install the 

solar panel where sunshine is not 

blocked during the majority of the day, for example away  

from tall buildings and trees. 

(b)  Ensure 

light/PIR unit is mounted on to a solid object, for 

example the side of a shed, the wall of a building. Bear in 

mind that the 5m wire integral to the solar panel needs to be 

plugged into the light unit.

(c)   Ensure PIR is clear of moving or flapping objects as these may 

cause false triggering.

(d)  Avoid installing it near areas of significant temperature change 

– e.g. air conditioning, central heating etc.

(e)   The PIR is more sensitive to movement across as opposed to 

movement towards or away from it. So when installing it, you 

should select a position so that the expected movement will 

be going across the sensor.

2.   INSTALLATION

(a)   Attach mounting plate to  

wall using fixings supplied.  

(Fig.1)

(b)  Slide light unit into mounting  

plate (Fig. 2) and secure using  

supplied screw in the bottom  

surface of the plate/light unit.  

(Fig. 3)

180 DEGREE DETECTION ANGLE

MOVEMENT TOWARDS/AWAY 

SENSITIVITY LOW

MOVEMENT ACROSS 

SENSITIVITY HIGH

12   m

Quick Setup Procedure

Pencil

Electric drill

Hammer

Screwdriver

Note:Please bring the following tools

Sensor Information

Correct moving orientation

Detection angle

180°

Warning!

1. Please keep it away from the children.

2.This product can installed for outdoor, but we suggest 

    that against for the rain/storm & High lights.

Spectrogram

Fig.1

Fig. 2

Fig. 3

Reviews: