14
●
Install the inverter in vertical position with maximum backward inclination
of 15°.
≤ 15°
OK
OK (max. 15°)
No
No
No
Fig. 6: Mounting position of the SP inverter
●
Make sure the installation base is robust enough to sustain the weight of
the inverter.
4�3
Mounting the inverter
The inverter is attached to the wall or to a mounting system using a mounting
plate. The mounting plate and the mounting material are included in the scope
of delivery. The following installation instructions apply to wall mounting of
the inverter
1. Mark the three drilling holes on the wall using the mounting bracket pro-
vided with the inverter.
248
88
121
305
Fig. 7: Mounting the mounting bracket
