16
2. Drill the holes. Insert the dowels, position the bracket and insert the screws to lock it.
Alternatively, you can fix the supplied mounting plate of the inverter to a mounting system
with the corresponding screws.
3. Mount the inverter on the monting bracket and tighten the inverter with rear panel using
screws as shown in the following figure:
4. Using a mounting system tighten the fixing screws on the back of the unit.
5. Secure the inverter with the supplied screw an the right side of the device (see figure
below).
Fig. 9: Securing the inverter
6. Make sure that the inverter is well attached to both the mounting plate or the mounting
system.
Summary of Contents for 17SHT
Page 1: ...Instruction Manual SolarMax SHT series 17SHT 20SHT 22SHT 25SHT 28SHT 30SHT...
Page 4: ...4...
Page 39: ...39 en...
