6
2 Safety
2�1
Intended use
SolarMax SHT series inverters are designed exclusively for the conversion of the direct current
generated by PV modules into alternating current which conforms to the parameters of the
public grid. Any other use is contrary to the intended use.
Inverters of the SHT series may only be used in combination with PV modules which comply
with the IEC 61730 standard. Inverters of the SHT series may only be connected to Class II
PV generators.
2�2
Safety instructions
DANGER!
Fatal electric shock hazard!
In daylight the PV generator supplies the inverter with a dangerously high DC
voltage.
■
Make sure that all electrical input conductors to the inverter are de-energized
before starting any work on the inverter or the input conductors.
DANGER!
Fatal electric shock hazard!
Components within the inverter are charged with a high voltage.
■
Never open the inverter while it is in operation.
WARNING!
Risk of injury from electric arc!
Removing the DC connectors when live can lead to dangerous electric arcs.
■
Switch off the DC disconnector at the inverter before removing the DC
connectors.
WARNING!
Fire hazard caused by inappropriate repair attempts!
■
The inverter does not contain any replaceable components. Defective inverters
must be returned to the SolarMax Service Center for repair or disposed of in
accordance with the instructions in this manual.
CAUTION!
The inverter can become very hot during operation�
■
Do not touch the heatsink and the side surfaces during or soon after the use.
Summary of Contents for 17SHT
Page 1: ...Instruction Manual SolarMax SHT series 17SHT 20SHT 22SHT 25SHT 28SHT 30SHT...
Page 4: ...4...
Page 39: ...39 en...
