16
No
Quantity Description
1
1
Inverter
2
1
Instruction manual
3
1
Mounting rail
4
2
External hexagon wood screws 6 x 50 INOX (for the installation of the
inverter)
5
2
Washers M6 x 18 INOX (for the installation of the inverter)
6
2
Plastic dowels 8 x 40 (for fixing in brickwork)
7
2
Phillips head sheet metal screws 4.8 x 13 (for locking the inverter on the
mounting rail)
8
6
Locking pins (for plugging unused holes in multiple cable connectors)
9
4
Locking clips (for DC plugs)
10
1
Toothed lock washer M5
(for connection of 2nd
protective conductor)
11
1
Lug M5 x 10 mm
2
12
1
Washer M5
13
1
Spring washer M5
14
1
Phillips head screw M5 x 12
43
Selecting the installation location
DANGER!
Fatal fire or explosion hazard!
The inverter is an electrical device with heat generation and the possibility of
sparking.
■
■
Install the inverter in an environment that is free of flammable gases and
fluids.
■
■
Never install the inverter near combustible materials. The installation
base must be non-combustible.
■
■
Follow the local fire safety regulations.
The ambient conditions are specified in the specifications, see Section 11.
Location and installation conditions
■
■
If possible, select a dry location for installation that is protected from water and snow.
■
■
Install the inverter in an easily accessible location, so that maintenance work can be
carried out easily.
■
■
Do not expose the inverter to direct sunlight.
■
■
Never install one inverter above another (this can interfere with passive cooling).
