18
44
Mounting the inverter
The inverter is fixed to the wall by a mounting rail. The mounting rail and the necessary
fixing accessories are included in the delivery package.
Procedure
1. Use the mounting rail as a template for drilling the holes.
2. Align the mounting rail in a horizontal position.
3. Mark 2 places for drilling.
446
376
26
[mm]
26
6.5
6.5
Figure 7 Dimensions of wall mounting bracket
– For the other measurements see section 3.4.
4. Drill two 8 x 50 mm
∅
holes.
5. Fix the mounting rail.
– Assembly sequence: plastic dowels 8 x 40, mounting rail, M6 washers, hexagon
head wood screws 6 x 50.
6. Attach the inverter to the mounting rail (see Figure 8).
7. Fix the inverter on both sides using the Phillips head screws:
A
B
C
Figure 8 Attaching and securing the inverter
