44
5. Check the data in the "Confirmation" menu.
6. To complete initial start-up, press
.
– The main menu will then be displayed (see Section 7.4).
623 Description of country-specific menus
Depending on the country setting, additional menus will be displayed during initial
start-up.
Country: Germany
Menu
Setting
Description
Plant system rating
> 3.68 – 13.8 kVA
The plant system rating is higher than 3.68 kVA
and/or does not exceed 13.8 kVA.
CosPhi(Pac) - QMCPP Inactive
The "cos
φ
(Pac)" function is deactivated (no
reactive power generated, cos
φ
=1).
On
The "cos
φ
(Pac)" function for reactive power
generation is activated.
63
Settings
Different communication parameters and monitoring functions can be set in the "Set-
tings" menu of the graphics display. All settings except the IP mode can also be made
using the MaxTalk 2 service software.
631 Changing parameters
The parameters in the "Settings" menu can be changed as follows:
1. In the Main Menu select the "Settings" menu.
Figure 34 "Settings" menu
2. Press
to select the parameter (e.g. "Time").
3. Press
to change to the editing mode.
4. Press
to select the required number.
