8
CAUTION!
Non-observance of these safety instructions may cause minor or medium
injuries.
ATTENTION!
Non-observance of these safety instructions may cause material damage.
Note
Notes contain additional information or facilitate the inverter operation.
2 Safety
21
Intended use
The inverters of the SolarMax TP series are designed exclusively for the conversion of the
direct current generated by PV modules into alternating current which conforms to the
parameters of the public grid. Any other use, in particular the conversion of direct current
from batteries or other storage elements into alternating current is not permissible.
Inverters of the TP series may only be connected to PV generators of protection class II.
22
Safety Instructions
DANGER!
Fatal electric shock hazard!
In daylight the PV generator supplies the inverter with a dangerously high DC
voltage.
■
■
Make sure that all electrical feed-in lines to the inverter are de-energized
before starting any work on the inverter or the feed-in lines.
DANGER!
Fatal electric shock hazard!
Components within the inverter are charged with a high voltage.
■
■
Never open the inverter while it is in operation.
