From the initial interface, you can check power, day power, total power,inverter ID ,
model and time.
8.1 The initial interface
During normal operation, the LCD shows the current status of the inverter,including the
current power, total generation, a bar chart of power operation and inverter ID,etc. Press
the Up key and the Down key to see the current DC voltage, DC current, AC voltage, AC
current, inverter radiator temperature,software version number and Wifi connection state
of the inverter.
8. General Operation
Pic8.2 The initial interface
Pic8.6 Main Menu
Pic8.3 PV input and DC current information
Pic8.4 AC running state information
Pic8.5 Temperature and software version
ON/OFF
<<
Setup
Power: 108W
Normal
State:
PV1: 0.0V 0.0A
PV2: 0.0V 0.0A
UC: 0V 0.0A
Freq: 0.00Hz
Press UP or Down you can check inverter DC voltage, DC current, AC voltage, AC
current, inverter temperature, software version information.
You can check the inverter inside temp, LCD software Ver137 and inverter software
Ver1400. There are two black spot in the bottom right corner. The first flash means inverter
is communicating with LCD. The second flash means LCD is communicating with Wifi
plug. There are four submenus in the Main Menu.
You can check the PV information, the number of strings input,MPPT voltage and MPPT
current.
You can check the three phase voltage, current, and grid currency.
Temp:35.3
℃
C
Start
LCD main menu
AC output data
Temp and
interface
Time
Generated energy
Operation
information
Fault record
Production data
Testing data
on/off
Param setting
System param
Running param
Protection param
Comm param
DC input data
Pic8.1 LCD operation flow chart
- 27 -
- 28 -
