4.1 Select installation location
4. Product installation
Pic4.1 Recommended installation place
Whenyoureceivetheinverter and prepare to install it, please select a suitable location,
should consider below factors:
● Ventilation—Must insure the air ventilation of the installation location,improper
installation may cause overheating and effect the working efficiency and lifespan.
● Sun-shade—Expose the inverter to sunshine will cause overh eating and effect the
working efficiency.
● Avoid rain and snow—Even if the inverter has IP65 protection. We still recommend
installing the inverter at the ventilate place where can avoid rain and snow. It can help
extend the lifespan of the inverter.
● Please select the wall with certain bearing capacity.
● When doing the installation, vertical slope cannot /-15°.Make sure no lateral
tilt. Otherwise it will affect the function of the heat sink. Cause the output power lower
than expected.
● If install more than one inverter, must leave at least 500mm gap between each inverter.
And each inverter must be at least 500mm above and below. And must install the
inverter at the place where children cannot tuch. Please see pic 4.3.
● Consider whether the installation environment is helpful to see the inverter LCD display
and indicator status clearly.
● Must offer a ventilate environment if inverter is installed in the airtight house.
Safety Hints：
Do not place or store any items next to the inverter.
Pic4.2 Installation Angle
≤
15
°
- 07 -
- 08 -
