SolarPath SPBS3 Installation Instructions Manual Download

Page: 4 / 6

123 Town Square Pl., #333 Tel. +1.201.490.4499

Jersey City, NJ 07310 www.solarpathusa.com

Contents

Verify that lamp, accessories and tools are present.

Drill four holes of 0.39-inch width and 2.75-inch depth on the flat concrete ground. (picture

①

)

Insert the expansion screws into the holes and lock the expansion screws with Allen Wrench.

(pictures

②-③

)

Put the lamp onto the metal bracket and align the four holes, then lock the lamp and metal bracket

with screws, spring washers and gaskets. (pictures

④-⑤

)

Installation
s

①

②

③

④

⑤

Summary of Contents for SPBS3

Page 1: ...1 123 Town Square Pl 333 Tel 1 201 490 4499 Jersey City NJ 07310 www solarpathusa com Solar bollards SPBS3 Installation instructions ...

Page 4: ...ill four holes of 0 39 inch width and 2 75 inch depth on the flat concrete ground picture 3 Insert the expansion screws into the holes and lock the expansion screws with Allen Wrench pictures 4 Put the lamp onto the metal bracket and align the four holes then lock the lamp and metal bracket with screws spring washers and gaskets pictures Installation s ...

Page 5: ...re present 2 Insert two spikes into the lawn with a space of 2 36 4 72 inches between them Picture 3 Use screws and gaskets to fix the metal bracket onto the surface of spikes Picture 4 Put the lamp onto the metal bracket and align the four holes then lock the lamp and metal bracket with screws spring washers and gaskets Picture ...

Page 6: ... screws on the side of the lamp and lift up the lamp see picture 2 Loosen the battery cover screw open the battery cover and replace the corresponding battery pack see picture 3 After replacing the battery lock the battery cover and install the lamp onto the metal bracket see picture Battery replacement ...