Safety instructions.
IMPORTANT
Before installing, wiring or handling the photovoltaic modules, please read the
instructions below.
The wrong installation of photovoltaic devices can result in serious injuries.
All installation work must obey the standards established by international, national and local regulations.
Before installation, remove all metallic object and jewelry.
Safety equipment must be worn at all time during the installation.
For your safety use insulated tools and gloves.
Do not allow unauthorized people access to the installation area.
Photovoltaic systems can be installed on roofs or high ground, however, modules should be installed only on
surfaces capable of supporting the additional weight of the panels.
The modules must be anchored to the ceilings by a formal structure result of a complete load analysis.
Do not install photovoltaic modules near flammable substances, gases or vapors.
The fire rating of this module is valid only when mounted in the manner specified in the
mechanical mounting instructions.
Work EXCLUSIVELY in dry conditions. For your safety, do not install or manipulate
the
photovoltaic modules under adverse weather conditions.
Reflection caused by snow or water can increase sunlight, raising the power
generated by the solar modules. Additionally, low temperatures can boost the panel power.
