background image

Congratulations on the purchase of your SOLARWATT Solar Module

These instructions describe the assembly, 
connection, maintenance, and disposal of solar 
modules. Please read them carefully and com

-

ply with them accordingly. 
The installation and electrical connection of 
photovoltaic systems may only be carried out 
by specialist personnel, who are familiar with 

this  work  through  their  professional  qualifica-

tions. For the operation, installation, use and 
maintenance of the other components, comply 
with the relevant installation instructions from 
the manufacturer. 

Incorrect installation can cause damage to pro

-

perty, which could consequently pose a risk to 
people. SOLARWATT accepts no responsibility 
or liability for losses, damage, or costs resulting 
from incorrect installation, operation, use, or 
maintenance or losses, damage, or costs which 
are connected to any of the above in any way. 
The SOLARWATT installation instructions should 
be made available to the operator as part of the 
solar power system documentation and stored 
by the operator.

Failure to comply with the installation instructions results in the warranty and guaran

-

tee becoming null and void.

WARNING

Comply  with  the  guidelines,  laws,  and  regula-

tions valid in the relevant country when plan

-

ning,  setting  up,  and  operating  grid-connec-

ted PV systems. For information on additional 
requirements, please contact the responsible 
local authorities and the network operator.

SOLARWATT solar modules are made from high-
quality  materials  and  high-performance  solar 

cells, and are therefore extremely reliable. The 
quality of the solar modules made exclusively 
in Germany is ensured by multiple tests carried 
out on the products throughout the entire 
production process. SOLARWATT solar modules 

are  VDE-tested  and  fulfill  the  requirements  of 
the extended test standard IEC 61215, as well as 
the safety standard IEC 61730. In SOLARWATT‘s 

own research and development department, 
tests are carried out using measuring, testing, 
and environmental simulation equipment 
which go above and beyond the current 
valid standards and enable us to optimize 

our products continually. If treated correctly, 

your  SOLARWATT  solar  modules  will  offer  you 

several decades of service.

SOLARWATT recommends insuring the PV sys

-

tem against reduced yields or damage with 

 SOLARWATT  Full  Coverage  for  complete  secu-

rity. Further information is available from your 
SOLARWATT partner or online at www.solarwatt.
com.

Information on the solar module

Detailed  electrical  and  mechanical  properties 
for your specific module type can be found on 

the relevant data sheet. The key technical data 

under  standard  test  conditions  [STC,  solar  cell 
temperature:  25°C,  irradiation:  1,000  Watt/m², 
air  mass:  1.5  (corresponds  to  a  sun  elevation 
angle of 41.8°)] can also be found on the name-

plate of the solar module.

PAGE 2 | SUBJECT TO CHANGE | © 2019 SOLARWATT GMBH | AZ-TM-PMS-1703 | REV 006 | STATUS: 08/2019

Summary of Contents for VISION 36M GLASS









Reviews: