INSTALLATION
The heater should be installed on non-flammable surfaces.
The heater should be installed at height of 2,5 – 3,5 meters.
The minimum distance between the heater and the heated surface must be at least 1,5
meters.
The heater should be mounted on the special bracket, which allows user to adjust the
angle of the heat transfer.
The heater cannot be installed directly above the power socket.
Always install the heater in a horizontal position.
IMPORTANT
Before repairing, replacing halogen lamp, or cleaning it, unplug/switch off the
heater from power and wait for the heater to cool down!
Never use an extension cord with this appliance.
Only a qualified electrician should replace a faulty heating lamp or cord.
If you have any doubt, please consult a qualified electrician.
If the heater is mounted on a tripod, the minimum distance from the floor should be 2
meters.
The heater must be secured with a minimum clearance of 2 meters from objects such
as cardboard, fabrics, etc. If the heater is used in workshops or garages where
flammable or inflammable materials are stored, the heater should be installed at least 4
meters from the source of the risk.
Keep the heater away from the reach of children.
WARNING:
If the heater is used where children are present, adult supervision is required; the heater
should not be used by adults or children whose physical, sensory and mental abilities
do not allow them to take the necessary safety measures without adult supervision.
Never touch the heater with wet or damp hands.
Never touch the heater barefooted.
The heating lamp, power cord could be replaced only by the manufacturer, warranty
service or a qualified electrician.
HEATING LAMP REPLACING INSTRUCTION
1.
Unplug/switch off the heater from power.
2.
Wait for the heater to cool down.
3.
Remove the front panel and release the reflector.
4.
Loosen the halogen lamp contacts and remove the lamp.
5.
Insert a new halogen lamp by repeating the above steps in reverse order without touching
the lamp with bare hands.
6.
A special halogen lamp could be acquired from authorized dealers.
