INSTALLATION MANUAL
2
ENG
FRA
ESP
ITA
Thank you for purchasing a Solbian product. Our photovoltaic modules are built using innovative technology and superior
quality materials. They will supply your energy needs in the most harsh environmental conditions and with the versatility to
suit many different applications. Please read these instructions carefully, to ensure correct utilization and a long life.
This manual is not an explicit or implicit warranty. Solbian accepts no responsibility for damage caused by the installation,
use and maintenance of its products. Solbian reserves the right to modify its products, the technical specifications and this
installation manual without notice.
THE FOLLOWING INSTRUCTIONS ARE EXCLUSIVELY GENERAL ADVICE. WE RECOMMEND THAT YOU HAVE THE MODULES
INSTALLED BY QUALIFIED TECHNICIANS, RESPECTING STANDARDS IEC 62548 AND 62257. WE RECOMMEND THAT YOU
CONTACT US DIRECTLY FOR DETAILS CONCERNING TECHNICAL ASSISTANCE.
RECOMMENDATIONS
The following instructions must be read carefully and fully understood before proceeding with the installation, connection and
use of SolbianFlex modules. Contact with electrical components, such as terminals, can cause burns and electric shock even
when the module has not yet been connected to an electrical circuit.
A photovoltaic module generates electricity as
soon as it is exposed to the sun or to a source of light.
Although the electrical output of one single SolbianFlex module
is not dangerous, the connection of several modules in series or in parallel increases respectively the voltage and current. A
photovoltaic system comprising of several modules can therefore generate voltages and currents which are dangerous and
could be lethal
SOLBAIN will not be held responsible in any way for accidents and damage to persons, including electric shock, caused by
incorrect use or installation.
IMPORTANT INFORMATION
This manual contains important information about safety, which must be read carefully and understood before proceeding
with the installation and use of SolbianFlex photovoltaic modules and their accessories.
Please keep the receipt of purchase and the original packaging for the duration of the warranty.
WARNINGS AND ELECTRICAL RISKS
P
Do not use different models of photovoltaic modules on the same system.
P
Check the compatibility of the charge regulator (if purchased separately) with SolbianFlex products.
P
Do not modify the electrical connections of the modules, in particular do not open or remove the sealed Junction Box which
joins the internal structure of the module to the external electrical connections.
P
Do not cut or pierce the module, this could cause live components to be exposed and/or damage the module.
P
Do not bend or apply excessive force to the cables.
P
Do not expose the photovoltaic module to direct light during installation of the system and in any case take care that when
the module is exposed to light. It produces current and therefore its terminals are electrically live.
P
The operations of maintenance, installation, removal of the photovoltaic modules must take place on dry surfaces.
P
Use exclusively tools with insulated grips.
P
Do not use photovoltaic modules in the presence of inflammable or explosive substances.
P
Keep the modules in their original packaging up to the moment of their installation.
P
Ensure that the position of the photovoltaic modules does not cause mechanical or electrical risks.
P
Do not use damaged photovoltaic modules (damaged during shipping, installation or in use).
P
Do not apply protections, paint or varnish to the module. Contact the manufacturer for information about cleaning and
protection of SolbianFlex modules.
Summary of Contents for ALLINONE
Page 2: ...3 OK OK NO 1 2 3 NO NO NO 4 5 6 NO OK 8 9 7...
Page 3: ...7 Installation manual Manuale di installazione...
Page 15: ......
