FRONT PANEL
1.
INPUT JACK - Plug your guitar in here using a high-quality shielded cable.
2.
OVERDRIVE/NORMAL SWITCH - Selects between the NORMAL and OVERDRIVE channels. This
switch is deactivated when using the included footswitch.
3.
BRIGHT SWITCH - Adds a slight treble boost to the NORMAL channel.
4.
CRUNCH/CLEAN SWITCH - Selects clean or crunch mode for the NORMAL channel.
5.
PREAMP:
NORMAL LEVEL - Adjusts the GAIN of the NORMAL channel
OVERDRIVE LEVEL - Adjusts the GAIN of the OVERDRIVE channel
6.
BASS CONTROL - Adjusts the amount of BASS for both NORMAL and OVERDRIVE channels
7.
MIDDLE CONTROL - Adjusts the amount of MIDDLE for both NORMAL and OVERDRIVE channels
8.
TREBLE CONTROL - Adjusts the amount of TREBLE for both NORMAL and OVERDRIVE channels
9.
MASTER:
NORMAL LEVEL - Adjusts the VOLUME of the NORMAL channel.
OVERDRIVE LEVEL - Adjusts the VOLUME of the OVERDRIVE channel.
10.
PRESENCE - Adjusts the amount of HIGH FREQUENCIES in the power amp for both NORMAL and
OVERDRIVE channels.
11.
DEPTH - Adjusts the amount of LOW FREQUENCIES in the power amp for both NORMAL and
OVERDRIVE channels.
12.
STANDBY - A traditional STANDBY switch to keep the tubes warmed up. When first turning ON the
amp, keep in STANDBY for at least 30 seconds before switching to ON. This will allow the circuits
to stabilize.
13.
POWER/ON SWITCH - Main AC power switch.
14.
POWER INDICATOR - Indicates when the amp is powered up.
Summary of Contents for SLO-30
Page 1: ......
