25
TREAD-BELT TRACKING ADJUSTMENT
The treadmill is designed so that the tread-belt remains reasonably centered while in use. It is
normal for some belts to drift near one side while in use, depending on a user’s gait and if they
favor one leg. But if during use the belt continues to move toward one side, adjustments are
necessary.
TO SET TREAD-BELT TRACKING
A 6 mm Allen wrench (132) is provided for this
adjustment. Make tracking adjustments on the
left side bolt. Set belt speed at 3 mph. Be aware
that a small adjustment can make a dramatic
difference which may not be apparent right away.
If the belt is too close to the left side, then turn
the bolt only a 1/4 turn to the right (clockwise)
and wait a few minutes for the belt to adjust
itself.
Continue to make 1/4 turns until the belt
stabilizes in the center of the running deck. If the belt is too close to the right side, turn the bolt
counter-clockwise. The belt may require periodic tracking adjustment depending on use and
walking/running characteristics. Some users may affect tracking differently. Expect to make
adjustments as required to center the tread-belt. Adjustments will become less of a
maintenance concern as the belt is used. Proper belt tracking is an owner responsibility
common with all treadmills.
ATTENTION:
DAMAGE TO THE RUNNING BELT RESULTING FROM IMPROPER TRACKING / TENSION
ADJUSTMENTS IS NOT COVERED UNDER THE WARRANTY.
TREADMILL BELT
The walking belt on your new treadmill is made of the highest quality materials designed to
last even under punishing conditions. When a treadmill belt is brand new, and has been in
the package for a few months before use, a common occurrence can happen; the area of
the belt that wraps around the rollers will take on the shape of the roller. Upon starting the
treadmill this shape in the belt causes a thumping sound each time the belt moves past
the rollers. Once the treadmill has been used for a few workouts, the belt wears in and the
thumping sound goes away. This noise is normal on new higher end belts so there is no
need to contact service; the new belt just requires a wear in period. Thank you for
choosing and enjoy your new treadmill.
Summary of Contents for 16008600800
Page 31: ...29 EXPLODED VIEW DIAGRAM ...
