background image

MANUFACTURER’S 

LIMITED WARRANTY 

Dyaco Canada Inc. warrants all its 

air bike

 parts for a period of time listed below from the date of retail sale, as

determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping 
date. Dyaco 

Canada Inc.’s responsibilities include providing new or remanufactured parts, at Dyaco Canada Inc.’s 

option, and technical support to our independent dealers and servicing organizations. In the absence of a dealer or 
service organization, these warranties will be administered by Dyaco Canada Inc. directly to a consumer. The warranty 
period applies to the following components: 

Frame 

 lifetime 

Parts  
Labour  

 1 year 

This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed 
below: 

1.

The warranty registration card must be completed and returned to the address listed on the card within 10 days of the

 

original purchase to 

validate the Dyaco Canada Inc.’s limited warranty.

2.

Proper use of the 

air bike

 in accordance with the instructions provided in this manual.

3.

Proper installation in accordance with instructions provided with the 

air bike

.

4.

Expenses for making the 

air bike

 accessible for servicing, including any item that was not part of the 

air bike

 at the

 

time it

 

was shipped from the factory.

5.

Damages to the 

air bike

 finish during shipping, installation or following installation.

6.

Routine maintenance of this unit as specified in this manual. 

EXCLUSIONS 

This warranty does not cover the following: 

1.

CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.

2.

Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve

 

malfunction or defects in workmanship or material, for units that are beyond the warranty period, for units that are

 

beyond the service call reimbursement period, for 

air bike

 not requiring component replacement, or 

air bike

 not in

 

ordinary household use.

3.

Damages caused by services performed by persons other than authorized Dyaco Canada Inc. service companies;

 

use of parts other than original Dyaco Canada Inc. parts; or external causes such as corrosion, discoloration of paint

 

or plastic, alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply

 if 

applicable

, or

 

acts of God.

4.

Products with original serial numbers that have been removed or altered.

5.

Products that have been: sold, transferred, bartered, or given to a third party.

6.

Products that do not have a warranty registration card on file at Dyaco Canada Inc. Dyaco Canada Inc. reserves the

 

right to request proof of purchase if no warranty record exists for the product.

7.

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,

 

INCLUDING THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.

8.

Product use in any environment other than a residential setting.

9.

Warranties outside of North America may vary. Please contact your local dealer for details. 

SERVICE 

B

y the serial number establishes the labour warranty period should service be required. If service is performed, it is in

 

your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. Service under this 
warranty must be obtained by following these steps, in order: 

1.

Contact your selling authorized SOLE dealer OR

 Dyaco Canada Inc.

2.

If you have any questions about your new product or questions about the warranty contact Dyaco Canada Inc. at 1-

888-

707-1880.

3.

If no local service is available, Dyaco Canada Inc. will repair or replace the parts, at Dyaco Canada Inc.’s option, within

 

the warranty period at no charge for parts. All transportation costs, both to our factory and upon return to the owner,

 

are the responsibility of the owner. The owner is responsible for  adequate packaging upon return to Dyaco Canada

 

Inc. Dyaco Canada Inc. is not responsible for damages that occur during shipping. Make all freight damage claims with

 

the  appropriate  freight  carrier.  DO  NOT  SHIP ANY  UNIT  TO  OUR  FACTORY  WITHOUT  A RETURN

 

AUTHORIZATION NUMBER. All units arriving without a return authorization number will be refused.

4.

For any further information, or to contact our service department by mail, send your correspondence to: 

Dyaco Canada Inc. 

5955

 Don Murie Street

Niagara Falls, ON 
L2G 0

A9

Product features or specifications as described or illustrated are subject to change without notice. 
All warranties are made by Dyaco Canada Inc.

 1 year 

-

30

 -

Summary of Contents for 16208768000



































Reviews: