13
Dyaco
Canada
Inc.
2016
customerservice@dyaco.ca
OPERATION OF
YOUR ELLIPTICAL
GETTING FAMILIAR WITH THE CONTROL PANEL
E55
CONSOLE
POWER UP
When power is connected to the elliptical the console will automatically power up. These models are
connected directly to 110 VAC and there is a power switch located where the line cord plugs into the unit on
the left side near the front (See page 4 for location).
When it is first powered on, the console will perform an internal self-test. During this time all the lights will
turn on, the
Message Window
display will show a software version (i.e.: VER 1.0), and the
Distance
Window
will display an odometer reading. The odometer shows how many virtual miles the elliptical has
gone. The
Time Window
shows how many total hours the elliptical has been used.
The odometer and time will remain displayed for only a few seconds then the console will go to the startup
display. The dot matrix display will be scrolling through the different workout profiles and the
Message
Window will be scrolling the start-up message. You may now begin to use the console.
!!ATTENTION
Your new elliptical console comes configured in an in-store’ display mode’ of operation, where the console
will remain powered on unless the main power switch is turned off. To exit the display mode, for normal
operation, press and hold the
Stop
,
Enter
and
Display
keys for five seconds; the display will show:
Display
Mode - ON
. Use the
Level
▲
/
▼
key to change the setting to
OFF
then press
Enter
.
COOLING
FAN
SPEAKER
PROGRAM
BUTTONS
(Manual,
Hill,
Fat
Burn,
DATA
WINDOWS
(Pulse,
Time,
Level,
Pace,
Distance,
MESSAGE
WINDOW
(
Program
name,
Lap,
Rpm,
Watts,
Segment
time)
CONTROL
DISPLAY
VIEW
HEADPHONE
JACK
FAN
POWER
SWITCH
AUDIO
IN
JACK
(MP3,
CD,
OR
SMARTPHONE)
