7
Dyaco
Canada
Inc.
2016
customerservice@dyaco.ca
ASSEMBLY
TOOLS
E55
ASSEMBLY INSTRUCTIONS
PRE
-ASSEMBLY
1. Using a razor knife (Box Cutter) cut the outside, bottom, edge of box
along the dotted Line. Lift Box over the unit and unpack.
2. Carefully remove all parts from carton and inspect for any damage or
missing parts. If damaged parts are found, or parts are missing, contact
your dealer immediately.
3. Locate the hardware package. Remove the tools first. Remove the
hardware for each step as needed to avoid confusion. The numbers in
the instructions that are in parenthesis (
#
) are the item number from the
assembly drawing for reference.
#188
.
Phillips
Head
Screwdriver
#187
.
Short
Phillips
Head
Screwdriver
#186
.
13/14mm
Wrench
(160mm)
#189
.
12/14mm
Wrench
(160mm)