Dyaco
Canada
Inc.
2013
12
7
ASSEMBLY
STEP 7
HARDWARE
STEP 7
#151
. 5/16” x 3/4” Button
Head Socket Bolts (4 pcs)
#75
. Safety Key
1. Attach the Support tube (
15
) between the upright tubes (
4
&
5
) with four
Button Head Socket Bolts (
151
). Tighten bolts firmly.
2. Place the Beverage Holder (
150
) on top of the Support tube (
15
) as
shown in the illustration.
3. Place the magnet of the safety key (
75
) in between the Start and Stop
buttons (if it isn’t already attached). The treadmill will not function
without this in place.
4. Check to make sure all bolts and screws are completely tightened.
8
ASSEMBLY
STEP 8
HARDWARE
STEP 8
#120
. 5 x 16mm
Tapping Screws (6 pcs)
1. Finish tightening the button head bolts (from Step 2 above) that secure
the console masts to the frame.
2. Attach the Console mast covers (
161
&
162
) to the Frame Base (
2
)
with six Tapping Screws (
120
). Tighten screws using the Combination
M5 Allen Wrench & Phillips Head Screw Driver (
131
).
