background image

Dyaco Canada Inc. 2013

 

29 

MANUFACTURER’S 

LIMITED WARRANTY 

ELLIPTICAL WARRANTY Effective August 1, 2012 

 

 

Dyaco Canada Inc. warrants all its Sole elliptical parts, for a period of time listed below, from the date of retail sale, as determined 

by sale receipt, or in the absence of a receipt eighteen (18) months from the original factory shipping date. Dyaco Canada Inc.’s 
responsibilities  include  providing  new  or  remanufactured  parts,  at  Dyaco  Canada  Inc.’s  option,  and  technical  support  to  our 
independent  dealers  and  servicing  organizations.  In  the  absence  of  a  dealer  or  service  organization,  these  warranties  will  be 
administered by Dyaco Canada Inc. directly to a consumer. The warranty period applies to the following components: 

Labor / Frame Weldments / Brake                               1 Year / Lifetime / 3 Years 
Cosmetic Items*                                                              90 Days 
All Other Components                                                    3 Years 

* Cosmetic items including, but not limited to the following: grips, console overlays, and labels/decals. 
 
NORMAL RESPONSIBILITIES OF THE CONSUMER 
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below: 

1. 

The warranty registration card must be completed and returned to the address listed on the card within 10 days of the orig the 
manufacturer’s limited warranty. 

2. 

Proper use of the elliptical in accordance with the instructions provided in this manual. 

3. 

Proper installation in accordance with instructions provided with the elliptical and with all local electric codes. 

4. 

Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose connections 
or defects in house wiring. 

5. 

Expenses for making the elliptical accessible for servicing, including any item that was not part of the elliptical at the time it 
was shipped from the factory. 

6. 

Damages to the elliptical finish during shipping, installation or following installation. 

7. 

Routine maintenance of this unit as specified in this manual. 

 
EXCLUSIONS 
This warranty does not cover the following: 

1. 

CONSEQUENTIAL,  COLLATERAL,  OR  INCIDENTAL  DAMAGES  SUCH  AS  PROPERTY  DAMAGE  AND  INCIDENTAL 
EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY. 

Note:  Some  states  do  not  allow  the  exclusion  or  limitation  of  incidental  or  consequential  damages,  so  this  limitation  or 
exclusion may not apply to you. 

2. 

Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve malfunction or 
defects in workmanship or material, for units that are beyond the warranty period, for units that are beyond the service call 
reimbursement period, for treadmill not requiring component replacement, or treadmill not in ordinary household use. 

3. 

Damages  caused  by  services  performed  by  persons  other  than  authorized  Dyaco  Canada  Inc.  service  companies;  use  of 
parts  other  than  original  Dyaco  Canada  Inc.  parts;  or  external  causes  such  as  corrosion,  discoloration  of  paint  or  plastic, 
alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts of God. 

4. 

Products with original serial numbers that have been removed or altered. 

5. 

Products that have been: sold, transferred, bartered, or given to a third party. 

6. 

Products that do not have a warranty registration card on file at Dyaco Canada Inc. Dyaco Canada Inc. reserves the right to 
request proof of purchase if no warranty record exists for the product. 

7. 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED, INCLUDING THE 
WARRANTIES OF MERCHANTABILI AND/OR FITNESS FOR A PARTICULAR PURPOSE. 

8. 

Product use in any environment other than a residential setting. 

9. 

Warranties outside of North America may vary. Please contact your local dealer for details. 

 
SERVICE 
 
Keep your bill of sale. Twelve (12) months from the date on the bill of sale or eighteen (18) months from the date of factory shipping 
as determined by the serial number establishes the labor warranty period should service be required. If service is performed, it is in 
your best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other 
rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order: 

1. 

Contact your selling authorized SOLE dealer.     

2. 

If  you  have  any  questions  about  your  new  product  or  questions  about  the  warranty  contact  Dyaco  Canada  Inc.  at 
1-888-707-1880.   

3. 

If no local service is available, Dyaco Canada Inc. will repair or replace the parts, at Dyaco Canada Inc.’s option, within the 
warranty  period  at  no  charge  for  parts.  All  transportation  costs,  both  to  our  factory  and  upon  return  to  the  owner,  are  the 
responsibility of the owner. 

The owner is responsible for adequate packaging upon return to Dyaco Canada Inc. Dyaco Canada Inc. is not responsible for 
damages that occur during shipping. Make all freight damage claims with the appropriate freight carrier. DO NOT SHIP ANY 
UNIT  TO  OUR  FACTORY  WITHOUT  A  RETURN  AUTHORIZATION  NUMBER.  All  units  arriving  with-  out  a  return 
authorization number will be refused. 

4. 

For any further information, or to contact our service department by mail, send your correspondence to: 

 
Dyaco Canada Inc. 
6050 Don Murie Street 
Niagara Falls, ON 
L2G 0B3 
 

Product features or specifications as described or illustrated are subject to change without notice. All warranties are made by 
Dyaco Canada Inc.

 

Summary of Contents for 168173020






























Reviews: