Dyaco Canada Inc. 2013 customerservice@dyaco.ca
12
COOLING FAN
DATA DISPLAY
DOT MATRIX
(Program Profiles)
MESSAGE WINDOW
(Time, Program Name,
Distance, RPM,
Calories, Laps, Level,
Watts, & Pulse)
FAN POWER SWITCH
HEADPHONE JACK
QUICK LEVEL KEYS
PROGRAM BUTTONS
(Manual, Hill, Fat Burn,
Cardio, Strength, Interval,
Custom, Fit-Test, 2HR)
DISPLAY
CONTROL KEYS
AUDIO IN JACK
(MP3, CD, or
SMARTPHONE)
OPERATION OF
YOUR FITNESS BIKE
GETTING FAMILIAR WITH THE CONTROL PANEL
CONSOLE
POWER UP
The console power is created by a built in generator. When you begin pedaling the
fitness bike, the console will automatically power up. If there is no movement at the
flywheel, the console will go to stand-by mode. In stand-by mode the console display
will turn off. To turn the console on, begin pedaling.
When it is first powered on, the console will perform an internal self-test. During this
time all the lights will turn on. When the lights go off, the Message window will show a
software version (i.e.: VER 1.0) and the
Distance
window will display an odometer
reading. The odometer reading displays how many virtual miles the fitness bike has
gone. The
Time
window displays how many hours the fitness bike has been used.
The odometer and time will remain displayed for only a few seconds then the console
will go to the startup display. The dot matrix display will be scrolling through the different
workout profiles and the Message window will be scrolling the start up message. You
may now begin to use the console.
