Customer Service 1-888-707-1880
9
Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
ASSEMBLY
STEP 3
1. Attach the Upright Tubes (
4
&
5
) onto the Frame Base (
2
)
with eight Button Head Socket Bolts (
130
) by using the
Combination M5 Allen Wrench & Phillips Head Screwdriver
(
131
).
Do not tighten the bolts completely until Step 7 is
finished.
ASSEMBLY
STEP 4
To complete this step, it is recommended that you find
something to rest the console on at the appropriate height or
have someone hold the console while you connect the cables
1. Connect the Speed Adjustment Switch Cable (
54
) to the
Speed Cable, Upper (
37
). Connect the Incline Adjustment
Switch Cable (
55
) to the Incline Cable, Upper (
38
). Connect
the Computer Cable, Middle (
49
) and Computer Cable,
Upper (
48
). Tuck the excess cable into the hand rail tubing to
prevent it from getting pinched.
Before attacheing the hardware to Step 5, make sure the cables you just connected don’t
get pinched in between the steel tubing. If they do, this may cause issues that prevent
the treadmill from operating properly.
3
#130
. 5/16"
×
1/2" Button
Head Socket Bolts (8 pcs)
HARDWARE STEP3
4
