Customer Service 1-888-707-1880
20
Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
USER
PROGRAMS
1. Select
User 1
or
User 2
via the
PROGRAM
keys then press
Enter
.
Note that the dot matrix display portion will have a single row of
dots at the bottom (Unless there is a previously stored program).
If there is a program stored under the button that is pressed, it
will be retrieved. If not, you have the option of programming in
your first name. The
Message Window
will display and flash the
letter “A”. To change it, press the any
▲
key, then “B” will be
displayed; if the any
▼
key is pressed, the letter “Z” will be
displayed. After selecting the appropriate letter, press
Enter
. The
letter “A” will again be displayed and blinking. Repeat the
procedure until all letters of your first name are programmed (7
characters maximum). When your name is displayed, press
Stop
and it will be stored under either
User 1
or
User 2
.
2. Next the
Message Window
is flashing
Age
. Use the
Incline
▲
/
▼
keys to adjust. Press
Enter
. This is a must to continue even if age
is not adjusted.
3. The
Message Window
will now be blinking a body weight value.
Enter your body weight and press
Enter
.
4. The
Time Window
and
Message Window
will now be blinking a
Time
value. Adjust the
Time
and
press
Enter
.
5. The first column (segment) will now be blinking. Using the
Speed
▲
/
▼
or
Quick
keys, adjust the
speed level to your desired effort for the first segment then press
Enter
. The second column will now
be blinking. Repeat the above process until all segments have been programmed. The first column
will be blinking again. This is for the incline programming. Repeat the above process to program all
segments for incline.
Note
: While in a User program, if you manually change the speed, all segment speeds from there on
will also change.
Examples
: If you increase your current speed 1 mph, the remaining segment speeds will increase by
1 mph. If you decrease your current speed .5 mph, the remaining segment speeds will decrease by .5
mph, etc.
6. Press the
Start
button to begin the workout and also save the program to memory.
7.
The profile picture will be re‐scaled to fit in the window, but the actual speed and incline settings
will remain the same as programmed.
