background image

Customer Service 1-888-707-1880

2

Dyaco Canada Inc. 2016

Email: customerservice@dyaco.ca

IMPORTANT

SAFETY INSTRUCTIONS

WARNING

-

Read all instructions before using this appliance.

DANGER

-

To reduce the risk of electric shock disconnect your treadmill from the electrical

outlet prior to cleaning and/or service work.

WARNING

-

To reduce the risk of burns, fire, electric shock, or injury to persons, install the

treadmill on a flat level surface with access to a 110-volt, 15-amp grounded outlet with only the

treadmill plugged into the circuit.

DO NOT USE AN EXTENSION CORD UNLESS IT IS A 14AWG OR BETTER, WITH ONLY ONE

OUTLET ON THE END: DO NOT ATTEMPT TO DISABLE THE GROUNDED PLUG BY USING

IMPROPER ADAPTERS, OR IN ANY WAY MODIFY THE CORD SET

.

A serious shock or fire hazard may result along with computer malfunctions. See Grounding

Instructions, page 3.

Do not operate treadmill on deeply padded, plush or shag carpet. Damage to both carpet

and treadmill may result.

Do not block the rear of the treadmill. Provide a minimum of 3 1/2 feet clearance between

the rear of the treadmill and any fixed object.

Keep children under the age of 13 away from the treadmill. There are obvious pinch points

and other caution areas that can cause harm.

Keep hands away from all moving parts.

Never operate the treadmill if it has a damaged cord or plug. If the treadmill is not working

properly, call your dealer.

Keep the cord away from heated surfaces.

Do not operate where aerosol spray products are being used or where oxygen is being

administered. Sparks from the motor may ignite a highly gaseous environment.

Never drop or insert any object into any openings.

Do not use outdoors.

To disconnect, turn all controls to the off position, then remove the plug from the outlet.

Do not attempt to use your treadmill for any purpose other than for the purpose it is

intended.

The hand pulse sensors are not medical devices. Their purpose is to provide you with an

approximate measurement in relation to your target heart rate. Use of a chest transmitter

strap is a much more accurate method of heart rate analysis. Various factors, including the

user’s movement, may affect the accuracy of heart rate readings. The pulse sensors are

intended only as exercise aids in determining heart rate trends in general.

Use handrails provided; they are for your safety.

Wear proper shoes. High heels, dress shoes, sandals or bare feet are not suitable for use on

your treadmill. Quality athletic shoes are recommended to avoid leg fatigue.

This applicance is not intended for use by persons with reduced reduced physical, sensory or

mental capabilities, or lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a person responsable for their

safety

Remove tether cord after use to prevent unauthorized treadmill operation.
SAVE THESE INSTRUCTIONS - THINK SAFETY!

Summary of Contents for 16008600630









































Reviews: