Customer Service 1-888-707-1880
4
Dyaco Canada Inc. 2016
Email: customerservice@dyaco.ca
IMPORTANT
OPERATION INSTRUCTIONS
NEVER
operate this treadmill without reading and completely understanding the results
of any operational change you request from the computer.
Understand that changes in speed and incline do not occur immediately. Set your desired
work level on the computer console and release the adjustment key. The computer will obey
the command gradually.
NEVER
use your treadmill during an electrical storm. Surges may occur in your household
power supply that could damage treadmill components. Unplug the treadmill during an
electrical storm as a precaution.
Use caution while participating in other activities while walking on your treadmill; such as
watching television, reading, etc. These distractions may cause you to lose balance which
may result in serious injury.
NEVER
mount or dismount the treadmill while the belt is moving.
SOLE
treadmills start at a
very low speed and it is unnecessary to straddle the belt during start up. Simply standing on
the belt during slow acceleration is proper after you have learned to opérate the unit.
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc).
Do not use excessive pressure on console control keys. They are precision set to function
properly with little finger pressure.
SAFETY
TETHER CORD
A safety tether cord is provided with this unit. It is a simple magnetic design that should be
used at all times. It is for your safety should you fall or move too far back on the tread-belt.
Pulling this safety tether cord will stop tread-belt movement. To Use:
1.
Place the magnet into position on the round metal portion of the console control head. Your
treadmill will not start and operate without this. Removing the magnet also secures the
treadmill from unauthorized use.
2.
Fasten the plastic clip onto your clothing securely to assure good holding power. Note: The
magnet has strong enough power to minimize accidental, unexpected stopping. The clip
should be attached securely to make certain it does not come off. Be familiar with its
function and limitations. The treadmill will stop, depending on speed, with a one to two step
coast anytime the magnet is pulled off the console. Use the Stop / Pause switch in normal
operation.
