OPERATION GUIDE
BEFORE OPERATING THE AIR PURIFIER:
1.
Carefully remove your air purifier from box and plastic bag.
2.
Select a firm, level and flat location for the air purifier.
3.
For proper air flow, locate the unit at least 30cm from any wall or
furniture. Make sure none of the grills are blocked.
4.
Before using, remove the filters then remove and discard the
bags.
5.
Plug the power cord into a right voltage AC outlet.
IMPORTANT:
When moving the air purifier, always lift the unit by the
carrying handle located on the back.
CONTROL PANEL
PRODUCT STRUCTURE
AIR CLEANING SYSTEM
Improve your indoor air quality with the COMEFRESH CF-8500 multi-step
air cleaning system. Multiple levels of cleaning include a HEPA filter that
captures allergens, an Activated Carbon filter to remove odours and UV-C
light technology enhances germ-killing.
PRE-FILTER:
Captures initial dust and allergen particles.
ACTIVATED CARBON FILTER:
Absorbs formaldehyde, benzene and other
noxious gas.
HEPA FILTER:
Captures dust, smoke, pollen and other allergens.
UV-C LIGHT
: Destroys micro-organisms, including germs, viruses, bacteria
and fungi (such as mould toxins).
PCO:
When Photocatalyst Titanium Dioxide (TiO2) absorbs Ultraviolet (UV)
radiation, it will produce hydrogen gas and hydroxyl radical help remove
VOCs, odours and kill germs.
OPERATING THE AIR PURIFIER
4
Main unit
UV-C/PCO device
Combination filter (Pre-
filter, Activated Carbon
filter, HEPA filter)
Front cover
Touch panel
Air outlet
4
5
1.
“
POWER
” BUTTON: Press this button to switch unit on or off
2.
“
REPLACE FILTER
” BUTTON: When light is flickering, press
and hold button for 5 seconds to reset the filter change
indicator.
3.
“
SPEED
” BUTTON: The fan speed of the unit can be adjusted
when the unit is in operation (L/I; M/II; H/III). The fan speed
will adjust from Low to Medium to High with each press of the
button.
